Led Lighting

Auxbeam Blog

If you have ever heard of LED lighting, you should also know that there are different varieties available including LED bulbs, bars, strips and... 52inch 300W Philips Straight Combo LED Light Bar
2

52inch LED light bar

If you have ever heard of LED lighting, you should also know that there are different varieties available including LED bulbs, bars, strips and other fixtures, which are easy to install in many different spots on the vehicles. These LED lights are manufactured to consume much lower amounts of energy than halogen lights and HIDs. The time and effort it takes to maintain the lights are minimal. Consumers can choose from a range of decorative colors that shine brightly through smoke and rain.

If you plan to buy or install LED light bars, consider the importance of choosing the right size. The very large LED light bars are made for large pickup and construction trucks and vehicles of similar sizes. These bars have a series of powerful light that last for years of continual use. Auxbeam gets a review on large size LED light bar—52inch 300W Philips Straight combo LED light bar.

This light bar is made of 100pcs 3W intense Philips LEDs, which includes 76pcs for spot beam in 30degree and 24for flood beam in 60 degree. With deep optic reflector, the light bar has a good performance of spot and flood pattern for ultimate light spread. The color temperature of the light is 6000K in pure white color, which is the color of the sun light. Here is the installation instruction.

ORBC-MB1-photo1-300x201

LED light bar installation process

Before installing the light bar and brackets, disconnect the positive battery connection. Open the doors, and pull back the rain stripping above the windshield line on both sides. Put masking tape on the painted surface in case that the brackets will scratch the paint while marking holes.

 

Install the driver and passenger brackets on the 52inch LED light bar using the mounting hardware that was supplied with the light. Hand tighten. Place the brackets on top of the door jam, half inch up from the windshield line and mark the three holes with a marker, or a center punch, on both sides.

ORBC-MB1-photo3-300x201

LED light bar installation process

Remove the brackets from the truck and drill pilot holes using a center drill. Then drill those holes. Slide the nut and washer over the supplied bolt, and screw them into a nut insert. Place the assembled bolt and nut insert into a drilled hole in the door jam.

Install all 6 nut inserts this way. Get the rubber pads install on the inside of each light bracket. Remove the masking tape from both sides of truck.Hold the Led light bar, with the brackets attached, up to the door jam and align the three holes on each side. Secure with the supplied button head screw, and tighten with an allen wrench.

Finally, tighten each side of the LED light bar to the bracket with a 6mm allen wrench so the light is positioned as desired in the bracket. Reapply the factory rubber door seal securely in the track. Complete wiring of light bar, and connect positive lead back to the battery system.

Want to know more about the lighting distance and lighting performance, you can have a look at the video below. It surely can help you. If you have any question, you can contact us.

Product link: https://www.auxbeam.com/70018669 

Facebook: https://www.facebook.com/auxbeam/ 

Twitter: https://twitter.com/auxbeam 

google+: https://plus.google.com/+Auxbeamlighting/posts

Share this:

Renee editorrenee

I'm an editor of auxbeam lighting.com. Here in this blog, I will introduce some new products that Auxbeam released and I will also tell you something really hot related to the LED lighting.