Remove the screws and clips holding the front grille in place.
Remove the front grille so you can gain access to the headlights.
Remove the metal bracket ring.
Unplug the adapter and remove the stock headlights.
Replace back with the Jeep Wrangler LED headlights the same way they were removed and connect the adapter.
If your head beam does not work at all during the initial installation, please check both the adapter on the LED headlights and the LED driver module box.
Make sure no pins are pushed out.
If the problem persists, you may need to re-pin the adapter.
If the high beam takes a couple tries to turn on, it means that there is not enough power being supplied.
The battery may need to be replaced or you may have to add a relay harness to directly draw the power from the battery.
If you experience the issue where your high beam is periodically flickering, you will need an anti-flicker decoder to solve the problem once and for all.
Sometimes, the issue will be localized on one side only.
If that’s the case, you will need to switch the LED drivers module box from the driver side to passenger side and vice versa to see if the module box is the issue.
Once your Jeep Wrangler headlights work, put the ring and the screws back. Once everything is secure, reinstall the front grille.
Your Jeep Wrangler is now ready for some bold off-road action with these new LED headlights.
Hello, my name is Jessica. Thanks for visiting my blog. Here are many detailed descriptions and reviews about Auxbeam LED lights. Browse the blog if you are free, looking for some resources which is helpful to you.
- January 2018
- December 2017
- November 2017
- October 2017
- September 2017
- August 2017
- July 2017
- June 2017
- May 2017
- April 2017
- February 2017
- January 2017
- December 2016
- November 2016
- August 2016
- June 2016
- April 2016
- March 2016
- February 2016
- January 2016
- December 2015
- November 2015
- October 2015
- September 2015
- August 2015
- July 2015
- June 2015